Monday, August 26, 2013

A Little R &R

I have run away for a while on a little



Here are a few of the things I have been doing since I left:

Hanging with my Peeps! in Bethlehem, PA.



Hiking with a view.


 Visiting castles.



And touring coal mines.


It has been magical. And much needed.

 I always forget what peace there is in nature.
 I'll tell you guys more about it Thursday, but for now,
 just think of me having a lovely time in the forest 
somewhere in rural PA.

Thursday, August 15, 2013

How to make a Framed Magnetic Chalkboard using Crown Molding

I live for garbage day. Not that I ever offer to take the trash out. No, that would be DK's job. The man only has four jobs around here: take out the trash, mow the lawn, put the kids to bed, and feed them breakfast during the school year. I am the total Home Management Technician, for better or worse. Usually for worse, as you all know that I am not a fantastic housekeeper. Garbage day may partially be to blame for that.



My enthusiasm is due entirely to the piles of stuff that people leave next to their garbage cans. Yes, folks, I am a dumpster diver. I know, you're all shocked that I would stoop to that level and stalk people's trash piles while pretending to be "out for a walk". Alright, you guys have known me for long enough now that NO ONE is shocked, except my mother, and she's probably not even shocked, just hanging her head at all of her wasted efforts to make me a lady instead of a hill billy.

But seriously, people throw away the craziest stuff. I found a totally functional overhead projector in my next door neighbor's trash pile one day. 

 See how nicely it lives nestled up in my daughter's closet? I really need to move it to the studio.

A real overhead projector, like teachers used to use in school and you always raised you hand to be the volunteer so you could write on the squeaky sheets of clear plastic that made your writing giant, whether or not you actually knew the answer to the problem, and may or may not have been monumentally embarrassed when you had no idea what you were doing and the guy you liked started laughing...

I'm sure that never happened to me in high school.

Anyway, neighbor's trash heaps can be a smorgasbord of raw materials for your projects. Just ASK the neighbors before you go merrily off into the wild blue yonder with their stuff. It may be a donation they have scheduled, or something. My neighbors already think I'm weird, so that isn't an issue.

So one day, I was eying my neighbor's trash heap and saw a ton of crown molding. Like seven or eight 5-8ft lengths of it. And he was throwing it away! you bet I hustled up to that door and said, "can I have this?" And I had it for 4 years. Sitting on top of the shelves in the studio. Just waiting for The Idea that would transform it from trash to treasure, or at least into something cool.

This is not that set of molding, but you get the idea. These are actually base boards 
sitting in another neighbor's yard that I spied on my walk this morning.

One day this last January, I got my idea, a huge magnetic chalkboard. I had a 2ft X 4ft piece of lauan backer board that I was using for my chalkboard and looked up to see the dumpster molding right above my head. Jackpot! The frame I had been dreaming about was $500!
So. Not. Happening. 
The molding was chunky, free, already painted, and previously beaten up. Perfect!



Step One: Get yourself a piece of wood, thin, flat, and rigid. 

 This is a giant sheet of lauan backer board. Mine was about 1/3rd this side.

I used a 2ft X 4ft piece of lauan backer board for my chalkboard. I think it cost about $7 at Home Depot. I wanted something really big that I could use to brainstorm ideas for the blog on. You don't have to make yours that big. I have used framed art pieces before and painted right over the glass. You could make life easier on yourself and just use a piece of metal and skip the whole magnetic paint step. Your base just needs to be clean, flat, smooth, and not too heavy.

Step Two: Prime the surface



I am a big fan of prime. I know all the Annie Sloan people say it's unnecessary, but it makes me feel better, kinda like having tons of money in a savings account. I just think it's a great was to make sure your decorative coats stick to the base you're using. I used Rustoleum spray primer, in grey. I figured that everything on top was black, so I'd go with a darker base. You don't have to use spray primer. I just had some in the studio and I like that it leaves a smooth finish. You could get a nice coat with a roller and Kilz or Bullseye 123. Just add a little black acrylic craft paint and stir it well if you want to tint your white primer grey or blackish. A true black will be hard to get.

Step Three: Roll on the magnetic paint




Magnetic paint is a really cool idea. There are tiny flecks of iron in the paint that build up and create an iron coated surface, which is what the magnets stick to. It is a dark charcoal color, so I wouldn't plan on making a white chalkboard with this product. You need to keep your top coat, ie. chalkboard paint, pretty thin to maintain the magnetic properties. It's also pretty expensive. I think mine cost $19 for less than a quart with a 15% discount. I have since seen it at AC Moore, which means you could use a 40% off coupon.

The magnetic paint I got was from Sherwin Williams (the can on the right), but I have no idea what the actual brand was. It's not obviously marked on the can. In any case, it's just as well because I didn't love this product. It did it's job...eventually. Like 4 or 5 coats later. The can says you need at least 2 coats, so I was ready for that. But I wanted really good adhesion from my magnets. For smoothness, I applied it with a small black foam roller. As it was a pretty big piece of wood, I just painted down the long side until I couldn't reach any more and then walked over to the other side and started up where I left off.

Part of my problem is that I wanted a really smooth surface, so I sanded after the first two coats.
DO NOT DO THIS
It removes the iron flecks and defeats your purpose. I did several more coats to make up for my mistake.

Please note, there is a 24 hour dry time between coats with this paint. So yes, it did take me the better part of a week to do this part of the project. I checked the "magnetic-ness" of the board by putting some super strong magnets I have against it. When they finally held a sheet of paper up, I knew I had enough coats.


Step Four: Apply your chalkboard paint

WalMart.com

I already had the can of Rustoleum Chalkboard paint from making the Barn Sale signs, so there was no cost to me there. I think it cost me $19 at Home Depot 2 years ago. WalMart.com has it for $14.93. I also saw it at AC Moore. So if you buy some, that's an idea of what it will run you.

After letting the magnetic paint dry completely (Please read the directions on the can you get, as various brands may have different drying times, usually 2-4 hours), I used my roller to apply a solid coat of chalkboard paint. There is just something so daring about painting something black. It just feels so final. So committed.

I added a second coat after letting the first dry completely. I think I left it overnight, then painted the second coat. That was dark enough for me. And I was pleasantly surprised that it smoothed the surface out a bit as well.



Because of the iron in the magnetic paint, the surface will NOT be smooth. You have to be OK with this. This photo shows you how the finish turned out. It's not the finish I was hoping for, but it works just fine and doesn't bug me now that I'm used to it.

Step Five: Season your chalkboard

This is a fun step. Once all the paint is completely dry, like "it's been a few days or so since you've painted" dry, then you get to color over the whole thing with chalk. You rub a piece of chalk sideways up and down the chalkboard until every nook and cranny is whitish. Then you wipe it all off and it looks like a real chalkboard.


Here is a terrible picture of mine at this point.

Step Six: Cut your wood for the frame.

I used the crown molding I found in my neighbor's garbage heap, but you can use what ever kind of trim you want. I found crown molding helpful to work with because there is a little recess at the bottom of the molding, where the wood cants back a bit to allow it to be installed on a diagonal.
 
See how the ends turn up? That is a nice place for your chalkboard to rest against.
Photo Source

So you figure out how big you want the frame. To do this, measure the outside edges of your chalk board. Then apply those measurement to what will be the inside of your frame. The frame will be larger on the outside than the inside, and the inside is what the chalkboard has to line up with.

I used my neighbor's compound mitre saw to make my cuts, with the blade set on a 45 degree angle, lining up with the mark for the "inside" and then cutting from there. You could use a hand powered mitre box as well, if you don't have your own saw or neighbor whom you can use for their tools handy.

After each cut, I lined the piece up with the chalkboard to make sure I had cut it right. Then I wrote which part of the frame it belonged to on the back of the wood.


When cutting, be as straight and precise as you can. I didn't know the saw as well as I might have, so some of my cuts didn't line up as nice as I'd have liked.

This joint can be filled with wood putty and then painted to make the gap invisible.


If you cut things right, then your corners should look like this when you lay them out together.


This lovely corner is where I ran out of wood. Notice how the actual corner of the bottom piece is completely missing? Always double check your measurements from the bottom (inside) edge and the top to avoid lovely surprises like this. I didn't have any more wood to work with and it was for me, so I'm just living with it to keep me humble.

Step Seven: Screw you wood frame together


Measure the thickest part of the molding. Get screws that are just a hair shorter than that measurement. If you are making a big frame, you will need about 4 per joint. If you are making  smaller frame, say 11x14 or 8x10, you could use as few as two per joint.

While you're at Home Depot getting screws, pick yourself up four steel "L" straps. I think they were 4 inches long on each side. Remember, this is a BIG frame. You can get the size that best seems to suit your project. The number of holes in the straps should tell you how many screws per corner you need. 

I made sure to mark where the thickest part of the molding was on the back, to avoid drilling a hole all the way through the wood through the front.

Use the L brackets to mark where your pilot holes are going to go.  Then VERY CAREFULLY drill the pilot holes, using a bit that is smaller than your screws. It is better to go too shallow, than too deep.

Once the pilot holes are drilled, lay out your L bracket in place and screw in the screws through the brackets and into the holes. Periodically check that you are not coming through the front. Repeat this for all four joints.
 
Initially, I glued the frame corners together and clamped them overnight to strengthen the joint, but some of the joints came apart anyway when I started drilling screws in holes. Gluing has almost always made a stronger joint for me, but this time it didn't seem to make much difference. I just used a regular wood glue.


The white squares on the L brackets are spacers, because my screws were just a hair too long. I just cut 1/2 inch pieces of mat board and poked a hole through them, then twisted them onto the screws, then screwed the screws into the pilot holes.

Step Eight: Put your chalkboard into the frame.

Once you have your frame built, it's time to add the chalkboard. Lay the frame out on a flat surface, face down. You can see the grove where the board will rest all ready to hold the chalkboard in place. Lay the chalk board face down into the groove. Due to the grooves, it should lay pretty flush with the back of the molding.

Because you are telepathic, you will have read this whole post before going to Home Depot and will also have bought 4 straight steel straps like this:


Here's the picture from above. It gives you a better idea of what the whole strap looks like.


I think they were about $1 each. 

I ran out of screws, because I am not telepathic and had not read this blog post yet, hence the dark brown screws pillaged from my tool chest in a frantic effort to avoid yet another trip to Home Depot, which is a 15 minute drive each way from my house. So the moral here is don't forget to buy the screws for your straps. (Hmm.. that sounds kinda kinky, doesn't it?) You will need two screws for each straight strap.

Lay your straps out and mark where the holes will go, taking care to mark where the thickest part of your wood is.

Drill your pilot holes VERY CAREFULLY, and then replace the straps, put screws in the holes, and have at it. Once again, checking every so often to be sure your screws haven't punctured the front.

Now all you have to do is carefully turn it over, check that it's stable and 



YOU'RE DONE!!!
WOOT. 

Now you get to add magnets. 

I find the small "super" magnets from WalMart or the 
strong ceramic magnets from craft stores work best.

And papers.


And go merrily on your way.


Friday, August 9, 2013

Return from Haven..or Was It Heaven?

Wow.
Haven was .... there's just no words. 
"Wow" is all I've got.

I have been reading reviews of Haven all week, instead of posting, because I haven't been able to verbalize the experience.

So here goes nothing..


Haven was friends. 

 Angie of Angie's Roost was my first friend at the conference. 
Notice how we both look crazy with excitement?

So many friends. It was like being on a playground in kindergarten where it would never occur to you to not like someone there. People just started talking to me all over the place. I was tiny the last time that happened. It was such an amazing treat for this extrovert, seasoned at starting conversations with strangers, to be called over to sit at a table with a group of new women, just because I was sitting alone near them. Who does that? Amazing!

Clockwise from left front: 
Rosemary of Not Just Paper and Paint, Jenna of Rain on a Tin Roof
Elizabeth from Southern Color, and Denise of Denise Designed.

And then to have a deep conversation about mixing your own chalk paint, for an hour? I mean, seriously guys, this was heaven.

Brandi of Don't Disturb This Groove and Nancy at Cobani Blue.

Every where you went, everywhere you sat, people were delighted to see you, to trade business cards, to hear about your blog. And they remembered your face and smiled at you or talked to you again in the halls. There were around 400 of us. Yet people remembered me.

 Katie of Deranchification, Megan from Rappsody in Rooms, and Anna From A Good Home.

Haven was knowledge.

The classes were loaded with incredible information on everything that a little DIY blogger's heart could want. I took most of the hand's on classes, even the basic chalk painting class offered by the good women at Annie Sloan, and learned things in each one of them. I passed on the hard hitting technical and advertising sections, because I knew I just wasn't ready for that, but I had friends who went and they were thrilled with the info. Everyone is typing up their notes and sharing with each other this week. I am telling you girls, it was good, meaty stuff. All of it was presented with an attitude of "You can totally do this," that I found so encouraging.

g
 Marian Parsons (aka Miss Mustard Seed) and Shaunna West teaching the Advanced Painting class

This pic was of our rowdy table in the Annie Sloan class. 
Front left clockwise Sondra of Sondra Lyn at Home, Sarah of The Yellow Cape Cod (see her using my photo, yeah!), Talana Williams, Kit kat, Janis of All Things Beautiful, Doreen of Hymns and Verses (her head is just behind Sue's), 
and Sue of The Blue Building.

 I loved this pillow arrangement from the decorating class I took. Not fussy, just pretty.
Design by Sarah Macklem of The Yellow Cape Cod

Haven was swag.

Oh my heavens! So. Much. Product. I was not prepared for the amount, nor the caliber of the stuff they just gave us for attending the conference. It wasn't the cheap, "made by the gross in China" pens with logos, or the ever popular "soda cozy." It was the real McCoy. A $25 bag from Ballard Designs, a roll of tape with a wave curve on it (yes, they make chevron too ladies), safety glasses from 3M, tape measures, paint samples, cookies, and on and on. It was Christmas in August. And then, they gave you even more stuff if you went to the vendor booths.

If you took the card in your bag to the Kreg booth, they gave you your choice of which full sized tool you wanted. I opted for the Kreg jig, a pocket hole guide. I have wanted one for a year, ever since John Petersik posted about his on Young House Love. And now I had it. For free!! Bless the good people at Kreg. May they live long and happy lives, with building materials to spare. 

I even had the chance to pay it forward. Sherry Petersik herself was walking by wondering what tool she had just gotten for John, and I told her it was a ripping guide, used to ensure straight cuts over long surfaces on a table saw. She got all excited and started bubbling over about how happy John would be. Does it get any better than making your heroes happy like that?

Speaking of meeting heroes...

Haven was Heroes.

I met ALL of my blogging heroes. Every single one of them. It all started when Karianne Wood of Thistlewood Farms walked in right past me with Linda Braden from It All Started With Paint.

I have been following both of them for a while, and they are actually some of my most frequent commenters. Karianne captured my heart right after I had my breakdown over her perfect, perfect farmhouse house and then posted my very messy, but hopeful house in this post. Linda got me with her post "Blogging is ruining my life." I knew after that post, that this was a blog I needed to read.

And I actually got to help Miss Mustard Seed and Shaunna West of Perfectly Imperfect set up for their class. I was sneaking in early to save myself a seat, and they looked a bit flustered. I looked around and saw that all the tables still needed to be set up for their class. Water cups needed to be filled, table coverings put on, rags and brushes dispensed, so I asked if they needed a little help. They sure did! I spent the next hour filling cups with a bucket of water so people would be able to rinse their brushes between finishes. How fun to spend time with such great ladies.

I love how Marian looks like Shaunna just said something controversial.

The next day, they both came and plopped down at my lunch table after they finished teaching. How cool is that? I even found myself babysitting Shaunna's purse for a while while Sue and I tried to decide whether or not to go to the Annie Sloan class. Then Karianne walks up to show off her fan "love gifts."

Karianne ended up getting so many presents from fans that her bag broke. 
 
Earlier the day before, Katie Bower from Bower Power decided to photo bomb my pic with Nancy.
 
 
Then she and Sherry Petersik went over to the Home Depot both for a little bean bag toss.

 
Sorry for the "flash' shot. My camera doesn't love indoor shooting.

I even got to meet The Graphics Fairy at the after party put on by Ryobi Tools and Home Depot.

It was amazing to me how the boundaries between people dropped the longer we were there. The teachers mingled with everyone. The "celebrity" bloggers just hung with the rest of us and took the same classes we did. They were happy to answer question or tell stories to anyone. I am still pinching myself to be sure I didn't just dream it all.


Haven was My Oracle

You know how the ancient Greeks used to go visit the Oracle with much ceremony and sacrifice, to know their Fate or future, or to get the answer to a burning question? Well I have been chewing on something for quite a while. I have been wondering how this blog and my art and running the barn sales could all fit into my life a little more smoothly. They haven't been playing very nice with each other lately. 
 
And I have been yearning for some kind of cohesive life mission, something specific to build toward. Haven was the key I needed to unlock all that for me. The information I got, conversations I had with the people I met, even going to church with my dear friends afterwards, all connected the dots for me.

As I was flying home last Sunday night, all the stars aligned for me and I had that Click moment you hear about. I know how it all fits and why it's important to do all three. I drafted a mission statement and I have a very clear vision of where I am going, at least for the next 10 years. So give me a few more months, and then hold on to your hats, folks! It's gonna get pretty crazy down here at Gathering Branches. Change is a-comin'!